Regulated Velocity Electric Blower Heaters
Product Overview

Print this page

 Dexon Regulated Velocity Electric Blower Heaters provide continuous, tempered and regulated positive air pressure ventilation where filtration is required. They will maintain both an adjustable preset airflow velocity to compensate for obstructions to intake or discharge air and an adjustable preset discharge temperature. Large units, 6kw and up, have staged heating elements to minimize power supply and demand billing charges.

Blower Heaters are easy to install, simply mount unit to structure, then run appropriate conduit for power, remote status and optional features used, run power to unit and make any adjustments if required to fan speed. For easy servicing of units the controls, elements and in most cases the blowers are mounted on a single removable panel. This series also has a built in filter track in the air inlet section.

All Electric Regulated Velocity Blower Heaters are CSA certified for Ordinary Location and for Class 1, Div. 2, Group C & D Locations, outdoor freestanding units are certified for Enclosure Type 3R. 

IMPORTANT:

CSA Certification for Ordinary Location is identified by a -1 at the end of the model number. If a -1 is not present the unit will be CSA Certified for Class 1 Div.2 Locations
Examples:
RVDH18-1 would be for ordinary location
RVDH18  would be for Class1, Div.2 location

 

SRVDH Series Blower Heater
  • Free Standing  or Flanged Pipe Mounted units with louvers on one side only. CSA Enclosure Type 3R
  • 3000 to 40500 watts.  One, two or three staged elements
  • Available in 120, 208, 240, 480 or 600 VAC, 1 or 3 phase
  • Approximately 80 - 1520 CFM @ 0 inches Static Pressure Water Column     
  • Variable speed brushless DC blower(s)
  • Dimensions vary with capacity

WRVDH Series Blower Heater
  • Indoor Wall Mount units with separate louver section
  • 3000 to 40500 watts.  One, two or three staged elements
  • Available in 120, 208, 240, 480 or 600 VAC, 1 or 3 phase
  • Approximately 80 - 1520 CFM @ 0 inches Static Pressure Water Column     
  • Variable speed brushless DC blower(s)
  • Dimensions vary with capacity

IRVDH Series Blower Heater
  • Indoor Inline or wall  mounted  units with inlet collar and no louvers
  • 3000 to 40500 watts.  One, two or three staged elements
  • Available in 120, 208, 240, 480 or 600 VAC, 1 or 3 phase
  • Approximately 80 - 1520 CFM @ 0 inches Static Pressure Water Column     
  • Variable speed brushless DC blower(s)
  •  Dimensions vary with capacity

OWRVDH Series Blower Heater
  • Outdoor Wall Mount units with louver section on hinged lockable door. CSA Enclosure Type 3R
  • 3000  to  40500 watts.  One, two or three staged elements
  • Available in 120, 208, 240, 480 or 600 VAC, 1 or 3 phase
  • Approximately 80 - 1520 CFM @ 0 inches Static Pressure Water Column        
  • Variable speed brushless DC blower(S) Dimensions vary with capacity

All Dexon Electric Blower Heaters are available in one or three phase, and voltages of 120/208,120/240,120/480,or 120/600.

WARNING: These units are designed to run continuously.  Failure to do so may void warranty.  Dexon will not be liable for any personal injuries, equipment or property damage caused by inappropriate installation or operations.

Please note: The airflow capacities listed above are only a guideline of the range of these products. Proper sizing is required to match air flow, versus heating capacities with regards to local climatic conditions, external system pressures, etc.. Please contact Dexon to facilitate sizing.

Site by B Smith Media
Copyright © 2011 Dexon Canada Air Systems Inc.